page 1 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com case style: mt1817 the big deal product overview JSW5-272DR+ is a high power refective sp5t rf switch, with refective short on output ports in the off condition. made using silicon-on-insulator process, it has very high ip3, a built-in cmos driver and nega - tive voltage generator. its tiny 2x2mm, 14-lead case enables wideband performance in tight spaces and dense pcb layouts. feature advantages wideband operation 5-2700 mhz enables a single component to be used in a vast array of applications from vhf up to 2.7 ghz. high iip3: 55 dbm typ. results in little or negligible inter-modulation generation, meeting requirements for digital communication signals. low loss, 0.6 db at 1 ghz high input power, 3w low loss and high power capability enable a single switch to be used for a variety of ap - plications, saving inventory. built in negative voltage generator operates with a single positive supply voltage; no need for dc blocking capacitors, un - less external dc is present at the rf ports. built-in cmos driver no need for external driver, saving pcb space and cost. tiny mclp package 2 x 2mm, 14-lead provides low inductance, repeatable transitions, and excellent thermal contact to pcb. key features 50 ? 5 to 2700 mhz high power 3w ? high port count in super small size ? single positive supply voltage, 2.5 C 4.8v ? high power p0.1db, 3w typ. ? low insertion loss, 0.6 db at 1 ghz JSW5-272DR+ sp5t rf switch
page 2 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com rev. or m152719 JSW5-272DR+ rs/th/cp 151106 50 ? 5-2700 mhz refective rf switch with internal driver. single supply voltage, +2.5v to +4.8v, high power 3w product features ? high isolation, 37 db typ. at 1 ghz ? low insertion loss, 0.6 db typ. at 1 ghz ? high ip3, 59 dbm typ. at 1 ghz ? low current consumption, 40 a typ. ? high power, p0.1db 3w typ. typical applications ? catv systems ? satcom system ? automated test stations ? telecom systems general description JSW5-272DR+ is a high power 3w refective sp5t switch with integral driver, operates with single positive supply voltage while consuming, 40 a typical. it has been designed for very wideband operation of 5-2700 mhz. it is packaged in a tiny 14-lead 2mm x 2mm x 0.55mm package and is rated msl1 and class 1b esd. JSW5-272DR+ case style: mt1817 simplifed schematic and pad description ground function pad number description rf com 13 rf common/ sum port rf1 3 rf out #1/in port #1 rf2 9 rf out #2/in port #2 rf3 2 rf out #3/in port #3 rf4 10 rf out #4/in port #4 rf5 1 rf out #5/in port #5 ground 11 ground externally function pad number description control #1 7 control in #1 control #2 6 control in #2 control #3 5 control in #3 vdd 4 supply voltage ground paddle ground externally not used 8,12,14 no connection sp5t rf switch +rohs compliant the +suffix identifies rohs compliance. see our web site for rohs compliance methodologies and qualifications
page 3 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com rf electrical specifcations (1) , 5 - 2700 mhz, t amb =25c, v dd = +2.5 to 4.8v parameter condition (mhz) min. typ. max. units frequency range 5 2700 mhz insertion loss (2) 5 to 1000 0.6 0.8 db 1000 to 2000 0.6 0.8 2000 to 2700 0.6 0.8 isolation between common port and rf1 to rf5 ports (3) 5 to 1000 35 37 db 1000 to 2000 28 30 2000 to 2700 25 27 return loss (on state) rf-com, rf1 to rf5 ports 5 to 1000 15.5 db 1000 to 2000 14.2 2000 to 2700 14.3 input ip3 v dd =2.5 to 4.8v 5 to 500 55 dbm v dd =3.0v 1000 to 2700 59 0.1db input compression (4) 5 to 2700 35 dbm dc electrical specifcations parameter min. typ. max. units vdd, supply voltage 2.5 3.0 4.8 v supply current (v dd = 3v) 40 a control voltage low 0 0.4 v control voltage high (5) 1.35 1.8 2.7 v control current 0.5 1.0 a shutdown current at v dd = 3v 5 a notes: 1. as measured in mini-circuits test board tb-724-5+ (see characterization test circuit, fig.1). 2. insertion loss values are de-embedded from test board loss. 3. isolations for other port combinations, see tables 1 & 2 4. do not exceed rf input power as shown in absolute maximum rating table. 5. if v dd <2.7v, then max control voltage high=v dd JSW5-272DR+ switching specifcations parameter min. typ. max. units rise/fall time (10 to 90% or 90 to 10% rf) 0.42 (rise time) 0.84 (fall time) sec switching time, 50% ctrl to 90/10% rf 1.9 (on time) 1.4 (off time) sec video feedthrough, (control 0 to 1.65v, freq.=10 khz) 3.0 mv p-p sp5t rf switch
page 4 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com JSW5-272DR+ table 1. isolation matrix (rf-com to rf1 to rf5 ports) table 2. isolation matrix (between output ports) frequency (ghz) isolation typ. (db) on port rf com to port rf1 rf2 rf3 rf4 rf5 rf1 0.01-1.0 --- 49 37 53 53 rf1 1.0-2.0 --- 43 30 38 38 rf1 2.0-2.7 --- 40 28 34 34 rf2 0.01-1.0 48 --- 48 48 48 rf2 1.0-2.0 43 --- 42 42 42 rf2 2.0-2.7 39 --- 38 39 39 rf3 0.01-1.0 39 44 --- 38 38 rf3 1.0-2.0 32 38 --- 30 30 rf3 2..0-2.7 29 35 --- 28 28 rf4 0.01-1.0 44 39 44 --- 44 rf4 1.0-2.0 38 31 38 --- 39 rf4 2.0-2.7 35 28 35 --- 35 rf5 0.01-1.0 44 39 44 44 --- rf5 1.0-2.0 33 34 31 39 --- rf5 2.0-2.7 28 31 27 36 --- frequency (ghz) isolation typ. (db) on port & to port rf1 rf2 rf3 rf4 rf5 from port rf1 0.01-1.0 --- 52 31 53 32 rf1 1.0-1.5 --- 48 28 48 28 rf1 1.5-2.0 --- 44 25 45 27 rf2 0.01-1.0 51 --- 54 31 52 rf2 1.0-1.5 47 --- 49 28 47 rf2 1.5-2.0 43 --- 45 25 44 rf3 0.01-1.0 32 54 --- 57 31 rf3 1.0-1.5 28 49 --- 51 28 rf3 1.5-2.0 26 45 --- 48 26 rf4 0.01-1.0 57 32 57 --- 56 rf4 1.0-1.5 51 29 51 --- 50 rf4 1.5-2.0 46 26 46 --- 45 rf5 0.01-1.0 40 49 33 50 --- rf5 1.0-1.5 36 45 30 45 --- rf5 1.5-2.0 34 44 27 43 --- sp5t rf switch
page 5 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com absolute maximum ratings (6) parameter ratings operating temperature -40c to +85c storage temperature -55c to 150c v dd , supply voltage 5.0v voltage control -0.5v min. 3.0 max. rf input power (6) 5 watt truth table (8) (state of control voltage selects the desired switch state) 6. operation of this device above any of these conditions may cause permanent damage. 7. derate linearly to 2.5w at 85c. characterization test circuit figure 1: block diagram of test circuit used for characterization. (dut soldered on mini-circuits tb-724-5+) test equipment: for insertion loss, isolation, return loss: agilents n5230a network analyzer , e3631a power supply. for switching time and video feed through agilents hp81110a pulse generator, 54833a oscilloscope, e3631a power supply. agilents n9020a spectrum analyzer, e8257d generator, e3631a power supply for compression: r&s network analyzer zva24, e3631a power supply. conditions: v dd = +2.5, +3.0 and +4.8v, control= 0 and 1.35v. for insertion loss, isolation and return loss: pin=0 dbm for input ip3 : pin=+10dbm/tone at v dd =3v for switching time: rf frequency: dc at 200mv, control frequency: 10 khz and 0 and +8v. JSW5-272DR+ tb-724-5+ r1, r2, r3, r4=1k ? 8. any control state not defned above, places the switch in an undefned state, but will not damage the switch. state of control voltages rf common to control #1 control #2 control #3 rf1 rf2 rf3 rf4 rf5 l l l on l l h on l h l on l h h on h l l on h h h shutdown sp5t rf switch
page 6 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com recommended application circuit product marking fig. 2: evaluation board includes case, connectors and components soldered to pcb. JSW5-272DR+ j6 1 14 black body model family designation sp5t rf switch
page 7 of 7 notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com msl test flow chart esd rating human body model (hbm): class 1b (500 to < 1000v) in accordance with jesd22-a114 machine model (mm): class a (pass 100v) in accordance with jesd22-a115 msl rating moisture sensitivity: msl1 in accordance with ipc/jedec j-std-020d additional notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp visual inspection electrical test sam analysis refow 3 cycles, 260c soak 85c/85rh 168 hours bake at 125c, 24 hours visual inspection electrical test sam analysis start finish additional detailed technical information additional information is available on our dash board. to access this information click here performance data data table swept graphs case style mt1817 plastic package; lead fnish: matte tin tape & reel f108 standard quantities available on reel 7 reels with 20, 50, 100, 200, 500, 1k or 3k devices suggested layout for pcb design pl-463 evaluation board tb-724-5+ environmental ratings env75 JSW5-272DR+ sp5t rf switch
|
